| Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts | |
|
|
Auteur | Message |
---|
Monster
Messages : 3269 Date d'inscription : 02/09/2013 Age : 50 Localisation : 69
| Sujet: Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts Lun 30 Sep 2013 - 10:53 | |
| A TRADUIRE SVP!!!Mods.... Is it possible to have this thread Pinned to the top of this section? Thank You Hello Fellas.... I have been thinking about doing this for a while because It seems we have a lot of people always looking for what size tubing, Nuts & Bolts, A/N Fittings and Braided Line for race cars. So have have been working on these for the past week developing these tables in an Excel spreadsheet. I had started doing this for myself when I started my Army Vega funny car kit to figure out what I should use to keep things in scale as best as I could But I had never really put them into spreadsheets like these til now. I thought it would be good to share with my fellow modelers here and if it could be of any use to any buddy. I am hoping that maybe the Mods could possibly pin it to the top Here or maybe if I am wrong in putting it in the Drag Racing section they could put it where fitting. I just thought it was fitting for the Drag Racing section because of the typical uses for these materials but its not limited to just drag cars and can be used for any car. I also wanted to let you all know if you are interested in having the Excel file I created just PM me and I will email you the file. I have these all set up on different tabs of the spreadsheet and I had to break them out and turn them in to jpgs so I could post on here. Hope this is helpful to everyone. Tubing Sizes: Braided Line: -Descriptions are from an Earls catalog Scale Hardware, Nuts & Bolts: Threaded Hex Bolts: Threaded Hex Nuts: Simulated Hex Bolts Simulated Hex Nuts: RB Motion A/N Fittings: Fittings P/N 1518 -1519 Fittings P/N 1520-1525 Fittings P/N 1526-1528 |
|
| |
Spring
Messages : 12009 Date d'inscription : 02/09/2013 Age : 57 Localisation : 11200 Paraza
| Sujet: Re: Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts Lun 30 Sep 2013 - 17:34 | |
| la même chose en MM et ce serait encore mieux ,les inches j'y comprends rien _________________ |
|
| |
Monster
Messages : 3269 Date d'inscription : 02/09/2013 Age : 50 Localisation : 69
| Sujet: Re: Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts Mar 1 Oct 2013 - 10:28 | |
| Bon y a pas un traducteur??? |
|
| |
Monster
Messages : 3269 Date d'inscription : 02/09/2013 Age : 50 Localisation : 69
| |
| |
Riket
Messages : 2973 Date d'inscription : 14/09/2013 Age : 60 Localisation : 28
| |
| |
llcoco2001
Messages : 2441 Date d'inscription : 11/09/2013 Age : 56 Localisation : Montpellier
| Sujet: Re: Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts Sam 16 Mai 2015 - 21:31 | |
| Mods.... Is it possible to have this thread Pinned to the top of this section? Thank You
Modérateurs, est il possible de mettre ceci au début de cette partie? Merci
Hello Fellas.... I have been thinking about doing this for a while because It seems we have a lot of people always looking for what size tubing, Nuts & Bolts, A/N Fittings and Braided Line for race cars. So have have been working on these for the past week developing these tables in an Excel spreadsheet. I had started doing this for myself when I started my Army Vega funny car kit to figure out what I should use to keep things in scale as best as I could But I had never really put them into spreadsheets like these til now. I thought it would be good to share with my fellow modelers here and if it could be of any use to any buddy.
Salut les potos!! Cela fait un moment que je pense à ça car il me semble que nous avons beaucoup de personnes à la recherche de la bonne taille de tuyaux, écrous et boulons, embouts A/F et durites pour les voitures de course. J'ai donc bossé sur la dessus la semaine dernière dans des feuilles Excel. J'avais commencé ça pour moi-même lorsque j'ai commencé mon Funny Car Vega Army pour comprendre ce que je devrais utiliser pour conserver l'échelle au mieux, mais je ne les avais jamais rassemblées dans un fichier Excel comme celui-ci jusqu'à maintenant. J'ai pensé que ce serai sympa de les partager avec mes amis maquettistes ici si cela peut aider quelqu'un.
I am hoping that maybe the Mods could possibly pin it to the top Here or maybe if I am wrong in putting it in the Drag Racing section they could put it where fitting. I just thought it was fitting for the Drag Racing section because of the typical uses for these materials but its not limited to just drag cars and can be used for any car.
J'espère que les modérateurs pourront le mettre ici en haut, ou si je me trompe en le mettant dans le sujet Drag Racing, peut être pourront ils le mettre où il doit être. J'ai pensé que cela irait bien dans le sujet Drag Racing du fait des utilisations courantes de ce type de matériel mais son utilisation ne se restreint pas aux drags et peut s'appliquer à n'importe quelle causse.
I also wanted to let you all know if you are interested in having the Excel file I created just PM me and I will email you the file. I have these all set up on different tabs of the spreadsheet and I had to break them out and turn them in to jpgs so I could post on here. Hope this is helpful to everyone.
Je voulais aussi vous dire que si vous souhaitiez récupérer le fichier Excel que j'ai créé, envoyez moi un MP et je vous l'enverrais par email. J'ai tout réparti en différentes feuilles que j'ai du couper et convertir en images JPEG pour pouvoir les poster ici. J'espère que cela sera utile pour tout le monde!
A l'attention de Monster : si tu as récupéré le fichier Excel je peux aussi le traduire mais ce sera plus long!!! _________________ Build them all!!!!! |
|
| |
le666
Messages : 1297 Date d'inscription : 05/10/2013 Age : 87 Localisation : Exorcisez-moi !!!
| Sujet: Re: Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts Sam 31 Mar 2018 - 16:52 | |
| WoW Super Kool ce topic !! Merci pour le tableau !! Tiens un truc que j'ai appris en mémo-technique il y a longtemps (en amateur du truc, rarement utilisé en réalité) c'st juste 1 pouce = 2,54 centimètres. A partir de là, sans tableau et une calculette sous la main, on peut se sortir de toutes les situations ou presque. Plus tard, en s'intéressant aux dragsters, il a fallu comprendre "le quart de mile" et le "8ème de mile" 1 mile= 1,609344 kilomètre 1/4 de mile = 402,3600 mètres 1/8 de mile = 201,16800 mètres Traduit par 1 mile = 1,609 kilomètre // 1/4 de mile = 402 mètres // 1/8 de mile = 201 mètres dans ma petite tête parce que quand tu fais du vélo, ça compte !! |
|
| |
Contenu sponsorisé
| Sujet: Re: Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts | |
| |
|
| |
| Reference Material Charts - Tubing Sizes, Braided Line, A/N Fittings & Nuts & Bolts | |
|